Flow Scan · free check · about one minute
See your own machines live, before you talk to us
Paste one line into PowerShell on a computer that is on the same network as your FANUC machines. Your browser opens with a list of the machines we can read, and you can watch them live.
[Net.ServicePointManager]::SecurityProtocol='Tls12'; irm https://liveshopfloor.com/scan.ps1 | iex
Works on Windows 10, 11 and Windows Server. Nothing is installed. Close the PowerShell window to stop.
Open PowerShell
On a computer connected to the machine network. Press Start, type PowerShell, press Enter.
Paste the line
Paste and press Enter. The scan page opens in your browser by itself.
Scan and watch
Press Scan network, tick a few machines, press Start monitoring.
What it does
- Looks for FANUC controls on your local network.
- Reads the model, state, running program, drawing number and parts counter.
- Shows them on a page that only this computer can open.
What it never does
- It does not write anything to a machine.
- It does not send your data anywhere. The page works with the internet unplugged.
- It does not install anything or stay on the computer after you close it.
The scan found nothing
The computer is probably on the office network, not the machine network. Run the line on a computer that is plugged into the same switch as the machines. Machines without a network cable cannot be seen at all; we connect those with a small add-on unit.
The machine network has no internet
Download the file on any computer, carry it over on a USB stick and run it there with:
powershell -ExecutionPolicy Bypass -File scan.ps1
Liked what you saw?
Tell us how many machines the scan found and how many it did not. We will show you the full system on your own machines.
Request a demo